Carbon Dioxide

A fire needs oxygen, fuel, and heat to continue to burn. By eliminating one of these three elements, a fire can be suppressed or extinguished. CO2 Fire Suppression System eliminates the oxygen to suppress the fire. When the suppression system detects smoke or fire, it then releases the CO2 agent into the space it is protecting. The CO2 level in the space increases as the oxygen level quickly drops causing the fire to be suppressed or extinguished.

CO2 is a colorless, odorless, and electrically non-conductive gas that leaves no residue behind. This means any sensitive equipment that is in the protected space is not damaged by the CO2, which reduces downtime and costs. Once the CO2 has dispersed to safe levels from the protected space, personnel can access any damage from the fire or smoke and quickly get back to work with no cleanup needed.

While CO2 fire suppression systems are highly effective at suppressing fires, the CO2 agent also poses a health risk when compared to the other agents. For this reason, you’ll find CO2 fire suppression systems most often in non-occupied environments.

Our Products

General
  • Reference: NFPA 12
  • Cylinder Capacity: 67 Lit.
  • Activation Type: Pneumatic/Electrical/Manual
  • Activation Device: Master/Slave, N2 Pilot
  • Selector valve: SVD, 1/2-4”
  • Pressure: High Pressure
  • Piping Test Pressure:  As per NFPA 12
  • Cylinder Filling Alarm: Weighing Device
  • Piping & Fittings Type: Standard Threaded/Welded
  • Piping & Fittings Size: 1/2 up to 4”
Accessories
  • CO2 Cylinder
  • Pilot Cylinder
  • Solenoid Valve
  • Selector Cabinet
  • Weighing Device
  • Manifold
  • Supports and Skid
  • Activation Hoses
  • Discharge Hoses,
  • Discharge Valves
  • Manual Actuator
  • Selector Valve
  • Lockout Valve
  • Odorizer
  • High Pressure Switch (PSH)
  • Low Pressure Switch (PSL)
  • Siren
  • Pneumatic Time Delay

Our Services

SISICO integrates Gas Based system from well-known manufacturer as Komtes AG Group (SIEX), Minimax, ABS, Eusebi, Unidet, Vitkovice, Rotarex, that are under NFPA standard and certificated by UL listed and approved by FM, and make skids with all accessories integrated in our company as per client request.